NEC UNIVERGE SV9100 Manual page 97

IP Phone Manager Commands
1. SwitchPortCtrl
Switch Port Control can enable or disable the PC Port on the connected IP Terminal(s).
2. Reset
This function resets the terminal(s) connected to the IP Phone Manager.
Two options for resetting the Connected terminal(s) are available:
Soft Reset – Application layer of the terminal
Hard Reset – Full hardware reset of the terminal
3. SecurityLock
This feature can lock or unlock the Connected Terminal(s), and has two modes:
Enable allows the user to change the status of the terminal security.
All Clear – Returns the terminal password to default value
o
Unlock – One-time security release on the terminal
o
Lock – Locks the Connected terminal(s)
o
Disable disables the SecurityLock feature from being set from the terminal.
4. Data Reset
Data Reset erases the configuration stored in terminal memory. Three terminal memory locations
can be reset.
IP Phone Settings – Terminal Configuration Data that is set in terminal programming under
the Config menu tree
Personal Settings
Personal Data – Data that the user has personally set (holding tone, ring tone, and telephone
book)
Factory Value resets all three data settings
o
5. Download
Part 2: VoIP Manual 97