NEC UNIVERGE SV9100 Manual page 191

Trunk-to-Trunk Transfer must be allowed in Program 14-01-13 (Trunk-to-Trunk Transfer Yes/No
Selection).
A blind transfer across a K-CCIS link cannot be completed until ringback tone is received at the
transferring station.
Related Feature List
Link Reconnect – K-CCIS
Station-to-Station Calling – K-CCIS
Uniform Numbering Plan – K-CCIS
Call Transfer – All Calls – K-CCIS
Brokerage Hotline – K-CCIS
Feature Description
This feature provides a ringdown connection between two stations, each using a multiline terminal, in
different offices in the CCIS network.
System Availability
Terminal Type:
All Terminals
Required Components:
GPZ-IPLE
Operating Procedures
To use this feature at any terminal:
1. Lift the handset or press Speaker.
2. Press the line/feature key associated with the pre-assigned station.
3. The destination station is automatically dialled, ring back tone is heard and the destination station
answers.
4. After completion of conversation, hang up or press Speaker. To make another Brokerage-Hot
Line-CCIS call immediately, press another line/ feature key without going on hook and off hook.
Service Conditions
Either multiline terminal in a Brokerage - Hot Line – (K-CCIS) pair may transfer a Hot Line call to
another station in the K-CCIS network using the Call Transfer – All Calls - (K-CCIS) feature.
Restrictions:
None
Related Feature List
Call Transfer – All Calls - K-CCIS
Station-to-Station Calling – K-CCIS
Uniform Numbering Plan – K-CCIS
Part 2: VoIP Manual 191