NEC UNIVERGE SV9100 Manual page 72

72
Registration Procedure – Manual
This mode of registration gives the ability to 'Hot Desk' from one SIP MLT to another. This means you can
move from one handset to another and keep the same extension number and relevant programming.
When the Register Mode is set as Manual in Easy Edit -
Setup./DT800 DT700 Hot Desk/DT800 DT700 Logon Type. (PRG10-46-01),
apply.
Set the Extension Number for the SIP MLT extension against an unused (no associated hardware) port.
Easy Edit -Advanced Items/VoIP/Extensions/DT800 DT700 Setup./DT800 DT700 Hot Desk/DT800 DT700
Logon Feature (PRG11-02)
The SIP MLT should be programmed to register to the GPZ-IPLE card on the SV9100.
Enter a Used ID and Password for each SIP MLT in Easy Edit -
DT700 Setup./DT800 DT700 Hot Desk/DT800 DT700 Logon Password.
extension number as the User ID.
Take the Personal ID Index from the above command and enter it against the relevant extension number in
Easy Edit -Advanced Items/VoIP/Extensions/DT800 DT700 Setup./DT800 DT700 Hot Desk/DT800 DT700
Logon Feature
If static IP addresses or external DHCP server is in use, follow these steps on the handset itself: -
Press Menu 0
User Name - ADMIN
Password - 6633222
OK
Press 1 1 - Choose DHCP on or off (depending on network requirements)Press OK
Press 2 - IP Address of phone (if not DHCP) Type in the required IP address using * for . Press OK.
Press 3 - Default Gateway of phone if required (if not DHCP) Press OK.
Press 4 - Subnet Mask of phone (if not DHCP) Press OK.
Press Exit.
Press 2 2 1 - Enter the IP address of the SV9100 GPZ-IPLE card Press OK.
Press Exit.
Press 4 1 - Enter 5080 (SIP Server port) Press OK.
Press Exit several times to get to the main menu.
Press Save.
It is not necessary to enter the User ID and password into the handset programming, this is entered
manually by the user each time they log on.
The phone will attempt to connect to the SV9100 but will show the following screen: -
Enter the User ID and press the 'Set' softkey
Enter the Password and press the 'OK' softkey
Advanced Items/VoIP/Extensions/DT800 DT700
the following information will
Advanced Items/VoIP/Extensions/DT800
It is recommended to use the