NEC UNIVERGE SV9100 Manual page 190

190
Dual Hold
Elapsed Time Display
Flexible Numbering of Stations
Handsfree Answerback
Hot Line
Link Reconnect
Multiple Call Forwarding – All Calls
Multiple Call Forwarding – Busy/No Answer
Paging Access
Quick Transfer to Voice Mail
Station-to-Station Calling
Uniform Numbering Plan
Voice Call
Voice Mail, Centralised
Automatic Recall – K-CCIS
Feature Description
This feature allows a call to be release transferred to another station in another office in the K-CCIS
network and recall back to the originator of the transfer after a programmed time.
System Availability
Terminal Type:
All Terminals
Required Components
GPZ-IPLE
Operating Procedures
Using a multiline terminal with a call in progress (Closed Numbering Plan):
1. Press Transfer. Internal dial tone is heard. The call is placed on Common Hold.
2. Dial the distant K-CCIS station number where the call is to be transferred.
3. Wait for the ringback tone.
4. Hang up.
- OR -
1. When the party answers, announce the transfer.
2. Restore the handset (transfer is completed).
Using a multiline terminal with a call in progress (Open Numbering Plan):
1. Press Transfer, and receive internal dial tone. The call is placed on Common Hold.
2. Dial the trunk Access Code.
3. Dial the Office Code number.
4. Dial the distant K-CCIS station number where the call is to be transferred.
5. Wait for the ringback tone.
6. Hang up.
Service Conditions
If PRG 34-07-05 is left at default (30) the transferred call recalls to the station that performed the
transfer when not answered.
A UNIVERGE SV9100 station can receive a K-CCIS transferred call as a camp-on call if allowed by
Class of Service.
Restrictions:
PRG 34-07-05 cannot be set based on a Timer Class of Service in PRG 20-31.