NEC UNIVERGE SV9100 Manual page 147

Specified Trunk Group Access (804 + Trunk Group number).
Operation
The operation is automatic, the user dials the trunk access code in the normal way.
Abbreviated Dial numbers will follow the trunk routing if set to TRG 0. For AspireNet ensure that the VOIPU
'trunk' ports are in their own trunk group, do not create a trunk group with a mix of VOIP trunk ports and any
other trunk port type.
VOIP trunk ports should not be seized directly via line keys or trunk access (SC 9, 805 or 804).
Conference
The user can create a Conference call to include a user in a networked system.
Operation
To establish a Conference:
Keyphone
1. Establish Intercom or trunk call.
2. Press CONF or Conference key (SC 851: 07) or press HOLD and dial 826.
3. Dial extension you want to add.
OR
Access outside call
OR
Retrieve call from Park orbit.
To get the outside call, you can either press a line key or dial a trunk/trunk group code.
You can optionally go back to step 2 to add more parties to your Conference.
4. When called party answers, press CONF or Conference key twice or HOLD key twice.
If you cannot add additional parties to your Conference, you have exceeded the system's Conference limit.
5. Repeat steps 2-4 to add more parties.
Single Line Telephone
1. Establish Intercom or trunk call.
2. Single Line Set
Hook flash and dial 826.
3. Dial extension you want to add.
OR
Access trunk call.
OR
Retrieve call from Park orbit.
4. Hook flash and repeat step 3 to add more parties.
OR
Hook flash twice to set up the Conference.
If you cannot add additional parties to your Conference, you have exceeded the system's Conference limit.
Department Calling
Department Group access is available via Networking. When the extension at System A tries to make a
Department Call to System B, System A should have a numbering plan which defines the Department
Access code at System B.
The following Department Calling options are supported with the Networking feature.
Department Calling Cycle
Department Routing When Busy
The following options are not available
Hunting Mode No
All Ring Mode When a call is transferred to a Department Group with All Ring, there is a difference
Part 2: VoIP Manual 147