NEC UNIVERGE SV9100 Manual page 163

Peer to Peer Video Support over SIP Trunk
Peer to Peer video calls via SIP Trunk Interconnection are available for SIP video devices. Additionally, SIP
trunk interconnection allows the SIP video device to access a Multi-Point Control Unit (MCU) to provide
video conferencing over multiple SV9100 systems.
Benefits
Users can make video calls within their SV9100 wide area network.
Required Software and Hardware
BE114065 SIP Trunk LIC, (5001). Port license
BE114054 SIP Terminal LIC, (5111). Port license
The following example configuration is used to illustrate what is required to be configured to enable this
feature.
Programming Commands
14-18-01 IP Trunk Type
14-18-02 System ID (SIP
Only)
14-18-03 P2P Mode (SIP
Only)
14-18-04 Video Mode
(SIP Only)
14-18-05 SIP Profile
Values
0=None
1=SIP
2=H.323
3=CCIS
(default=0)
(0-50)
(default = 0)
0=disable
1=enable
(default=0)
0=disable
1=enable
(default = 0)
0=Profile 1
1=Profile 2
2=Profile 3
Part 2: VoIP Manual
Command Description
This item is read only and will show the IP trunk
type setup in CMD 10-03
Type 1=SIP is required for video support.
This item is read only and will show the NetLink
system ID when multi SIP trunk with NetLink is
enabled.
This item enables the Peer to Peer feature for SIP
trunk.
This item enables the Video feature for SIP trunk.
This item assigns the IP trunk to specific SIP
carrier profile
163