NEC UNIVERGE SV9100 Manual page 99

1. Web Config
The IP terminal has an HTTP server for web programming. Selecting this button starts a session
with Internet Explorer (or the default web browser installed on the local PC) for all the connected
and selected terminals. You have one browser session started for every selected terminal – this
feature is used on an individual terminal.
2. Auto Config
The Auto Config button is a direct link to the Auto Configuration Tool. Auto Configuration Tool is
used to build a master terminal configuration file for terminal initial setup Plug and Play
purposes.
Toolbar Features
1. Search – Sets the frequency and timing that the IP Phone Manager attempts to search and
discover IP terminals on the network.
2. Port Set – Port Set allows the customization for Port Numbers that the IP Phone Manager
Application and IP Terminals use for communication.
Default IP Phone = 3530
IP Phone Manager = 20111
3. Interface – Select or change the active PC NIC card that IP Phone Manager needs to use.
4. ListCtrl – List Control is used to select and organize the fields to be viewed in the active IP Phone
Manager home layout screen.
Select
5. Help – Displays Version information of IP Phone Manager.
6. Select ALL – Selects ALL discovered terminals.
7. Clear ALL – Unselects all preselected terminals on the home screen.
8. Quit – Terminates all communication between IP Phone Manager and closes the application.
Part 2: VoIP Manual 99