NEC UNIVERGE SV9100 Manual page 215

Service Conditions
General:
The operator call code must be for an individual Attendant Access Code number.
When calling to a UNIVERGE SV9100 Attendant Position, the SV9100 sends Operator to the call
originator as the name.
Shows Office Code if using Open Numbering Plan.
If using an Open Numbering Plan and a call is made to an UNIVERGE SV9100 Attendant Position,
the operator office code is included with the name.
When making a call from a UNIVERGE SV9100 Attendant Position across a K-CCIS network, the
Caller ID Name and Number display is the same as for a station-to-station call.
In a Closed Numbering Plan network, a station can call an Attendant in the K-CCIS network by
dialling 0.
In an Open Numbering Plan network, a station user can call an Attendant within the K-CCIS
network by dialling: Access Code + Office Code + 0.
Restrictions:
Operator Calling, PRG 20-14-05, does not keep a Tie Line caller from dialling 0 for the operator.
Related Feature List
Attendant Positions
Calling Name Display – K-CCIS
Calling Number Display – K-CCIS
Centralised Day/Night Mode Change – K-CCIS
Voice Calls – K-CCIS
Guide to Feature Programming
This guide provides a list of associated Programs that support this feature.
For Main System
Part 2: VoIP Manual 215