NEC UNIVERGE SV9100 Manual page 194

194
4. Restore handset or press Speaker.
To set Call Forward – All Calls – K-CCIS from a Multiline Telephone (Open Numbering Plan):
1. Press the Call Forward – All ON/OFF key.
2. Dial 1 to set.
3. Dial the trunk Access Code.
4. Dial the Office Code number.
5. Dial the distant K-CCIS station number.
6. Restore handset or press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code 848 (default), then 1 to set.
3. Dial the trunk Access Code.
4. Dial the Office Code number.
5. Dial the distant K-CCIS station number.
6. Restore handset or press Speaker.
To cancel Call Forward – All Calls – K-CCIS from a Multiline Telephone:
1. Press Call Forward – All ON/OFF key.
2. Dial 0 to cancel.
3. Press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code 848(default), then dial 0.
3. Restore the handset or press Speaker.
Service Conditions
General:
Any station or Call Arrival (CAR) key can be set for Call Forwarding – All Calls – K-CCIS.
Restrictions:
Call Forward – Off-Premise must be allowed in PRG 20-11-12 (Class of Service External Call
Forward) to set call forwarding to a remote K-CCIS station number.
Trunk-to-Trunk Transfer must be allowed in PRG 14-01-13 (Trunk-to-Trunk Transfer Yes/No
Selection).
A Single Line Telephone user can transfer a trunk call to another internal station that is set for Call
Forwarding – All Calls – K-CCIS, however, when the distant party answers the call, a conference
cannot be established.
The destination station in the distant system is the only station that can call a station with Call
Forwarding – All Calls – K-CCIS set.
Call Forwarding with Both Ringing (All Calls) is not supported.
Call Forward Split Internal/External is not supported.
Forwarding to Voice Mail is not included in the Maximum Hop Count.
Call Forward continues to operate to a MLT that has been removed.
Related Feature List
Call Forwarding – Busy/No Answer – K-CCIS
Multiple Call Forwarding – All Calls – K-CCIS
Multiple Call Forwarding – Busy/No Answer – K-CCIS
Link Reconnect – K-CCIS
Uniform Numbering Plan – K-CCIS
Guide to Feature Programming
This guide provides a list of associated Programs that support this feature.