NEC UNIVERGE SV9100 Manual page 114

114
DIL
Leased Line (Tie Line)
Door Phone (operation explained below)
Hold/Transfer
Normal Hold
Park Hold
Group Hold
Station Park Hold
Type of transfer service
Call Forward – Immediate
Call Forward – Both Ring
Call Forward – No Answer
Call Forward – Busy
Call Forward – Busy/No Answer
Follow Me
Fixed Call Forward
Fixed Call Forward Off Premise
Call Forward to Device
Automated Attendant
Transfer operation
ISDN Normal Transfer
ISDN Blind Transfer
SLT Normal Transfer
SLT Blind Transfer
DSPDB VM Normal Transfer
DSPDB VM Blind Transfer
CLI/Name Display
CLIP Display
Extension Name Display* 1
Nickname Display* 1
Extension Number Display* 1
SIP "Display Field" Display* 1
Abb Dial Name Display
Door Phone Name Display
Voicemail Name Display* 2
CLI Update after transfer (IP DECT)
* 1 One of these options can be displayed depending on system programming and the received SIP
information.
* 2 Dependant on the type of Voicemail system in use.
Others
Can belong to an Incoming Ring Group
Can belong to Department Group, however all ring mode is not supported
Peer to Peer Mode (allows RTP to be sent directly between SIP endpoints)
Voice Mail Message Waiting
Assign as Virtual Extension
Conference Barge In/Monitor