NEC UNIVERGE SV9100 Manual page 204

204
Required Components:
GPZ-IPLE
Operating Procedures
Normal call handling procedures apply.
Service Conditions
General:
Both the caller/calling station number and name can be displayed on an UNIVERGE SV9100
station if allowed by Class of Service.
For incoming or outgoing K-CCIS calls, the Calling/Called Name and Number are displayed for
the entire length of the call including the Elapsed Call Time.
For an open numbering plan the Office Code number and station number are displayed for caller/
calling station number.
Restrictions:
The UNIVERGE SV9100 supports 2 to 8-Digit station numbers.
When calling over a K-CCIS tandem connection, the calling party number (CPN) is transferred to
the ISDN network.
Related Feature List
Calling Name Display – K-CCIS
Station-to-Station Calling – K-CCIS
Uniform Numbering Plan – K-CCIS
Guide to Feature Programming
This guide provides a list of associated Programs that support this feature.