NEC UNIVERGE SV9100 Manual page 155

Transfer
The following types of Transfer are available with Networking:
Screened Transfer
Unscreened Transfer
Transfer to busy extension
Operation
Transferring Trunk Calls
To Transfer a trunk call to a co-worker's extension:
1. At system phone or 2-Button telephone, press HOLD.
OR
At a single line telephone, hook flash.
You hear Transfer dial tone.
2. Dial co-worker's extension number.
If the extension is busy or doesn't answer, you can dial another extension number or press the line key to
return to the call.
SLT users can retrieve the call by pressing hook flash. If a call has been transferred and the SLT user has
hung up the handset, the call be can retrieved by dialling 715 and the extension number to which it had
been transferred.
3. Announce call and hang up.
If you don't have Automatic On Hook Transfer, you must press CONF or your Transfer Programmable
Function Key to Transfer the call.
If your co-worker doesn't want the call, press the flashing line key to return to the call.
SLT users can retrieve the call by pressing hook flash. If a call has been transferred and the SLT user has
hung up the handset, the call be can retrieved by dialling 815 and the extension number to which it had
been transferred.
If you don't want to screen the call, hang up without making an announcement.
Transferring to a b usy extension
Will require the Transfer to Busy Extension option enabled in system programming at the originating
system and the target system.
1. Dial the co-worker's extension number.
Busy tone is heard.
2. Press the Transfer button.
3. The call will wait for the busy co-worker to become free and then will ring.
Transferring Intercom Calls
To Transfer your Intercom call:
1. At system phone, press HOLD.
OR
At single line telephone, hook flash.
2. Dial extension to receive your call.
If the extension is busy, doesn't answer or does not want the call, you can dial another extension number
or press the lit CALL key to return to the call. In addition, you may be able to transfer the call to the busy
extension.
SLT users can retrieve the call by pressing hook flash. If a call has been transferred and the SLT user has
hung up the handset, the call be can retrieved by dialling 715 and the extension number to which it had
been transferred.
3. Announce your call and hang up.
With Automatic On Hook Transfer When you hang up, the call is automatically transferred.
Without Automatic On Hook Transfer You must press your Transfer Programmable Function Key to
Transfer the call.
To Transfer the call unscreened, press your Transfer Programmable Function Key and hang up without
making an announcement.
Part 2: VoIP Manual 155