Table of Contents
Advertisement
Chapter 6 RAID Group Management
6.2 Functions in the Action Area for RAID Group
■
Automatically selecting drives to create RAID groups
The procedure to create a RAID group is as follows:
Procedure
1
2
3
Click [Create] in [Action].
Select "Automatic" for "Create Mode".
Specify the RAID group detailed information, and click the [Create] button.
•
Name
Input a RAID group name that is to be created.
An existing RAID group name cannot be used.
The following input conditions apply:
-
1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Space
•
Number of RAID Group
Input the number of RAID groups that is to be created.
When creating multiple RAID groups at a time, the new RAID groups are named
automatically. Refer to
details.
•
Disk Type
Select the type of drive that configures a RAID group from the list box.
-
Online
-
Nearline
-
SSD
•
RAID Type
Select the type of RAID group that is to be created from the list box.
-
High Performance (RAID1+0)
-
High Capacity (RAID5)
-
High Reliability (RAID6)
-
Reliability (RAID5+0)
-
Mirroring (RAID1)
-
Striping (RAID0)
•
RAID Group Capacity
Enter the RAID group capacity that is to be created and select the units of capacity.
A RAID group is automatically created with a capacity of the entered value or higher.
The following input conditions apply:
-
Numeric characters
-
TB/GB
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
"Appendix C Naming Convention of Volumes" (page 617)
119
for
P2X0-1090-02ENZ0
Advertisement
Table of Contents
