Chapter 11 System Management
11.2 Functions in the Action Area for System
11.2.9.1
Modify Storage Name
This function registers the name, administrator, and the installation site of the ETERNUS DX
Disk storage system.
Information registered in this screen is used for the following functions and screens:
•
Network management using SNMP
•
Storage system name displayed in the login screen and the operation screens
The procedure to change the device name is as follows:
Procedure
1
2
Once the storage system name has been specified, it cannot be deleted (it
can be changed).
Click [Modify Storage Name].
Specify the parameters, and click the [Set] button.
•
Name
Specify the storage system name (required).
The following input conditions apply:
-
1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Spaces
•
Installation Location
Specify the installation location of the ETERNUS DX Disk storage system.
The following input conditions apply:
-
1 - 50 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Spaces
•
Administrator
Specify the administrator information (the administrator name, contact information, etc)
of the ETERNUS DX Disk storage system.
The following input conditions apply:
-
1 - 50 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Spaces
•
Description
Specify the description of the ETERNUS DX Disk storage system.
The following input conditions apply:
-
1 - 50 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Spaces
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
576
P2X0-1090-02ENZ0