Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
The procedure to create a SAS port group is as follows:
Procedure
1
2
-
Ports without the host affinity setting can be members of a port
group, regardless of whether the affinity mode for the group is
enabled (On) or disabled (Off).
•
To change the settings of a port groups, refer to
Group" (page
•
To add a port to an existing port group, refer to
Group" (page
Click [Create SAS Port Group] in [Action].
Specify the name of the port group to be created, select all the ports to be
registered in the port group, and click the [Create] button.
•
Name
Specify the port group name.
An existing port group name cannot be specified.
The following input conditions apply:
-
1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Space
•
Checkbox to select a port
Select the checkbox of the SAS port to be registered in a SAS port group.
•
•
•
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
350).
350).
When a port that has the affinity mode enabled (On) is
selected, ports that have the affinity mode disabled (Off)
cannot be selected.
When a port that has the affinity mode disabled (Off) is
selected, ports that have the affinity mode enabled (On)
cannot be selected.
Up to eight ports can be selected.
345
"9.2.3.6 Modify Port
"9.2.3.6 Modify Port
P2X0-1090-02ENZ0
Advertisement
Table of Contents
