Chapter 7 Thin Provisioning Pool Management
7.1 Thin Provisioning Pool Status
The following items are displayed in the Main area:
•
No.
The TPP number is displayed. Clicking this item displays the screen shown in
Provisioning Pool Detail (Basic)" (page
•
Name
The TPP name is displayed. Clicking this item displays the screen shown in
Provisioning Pool Detail (Basic)" (page
•
Disk Type
The type of drive that configures the TPP is displayed.
-
-
-
•
RAID Type
The type of RAID group that configures the TPP is displayed.
-
-
-
-
-
•
Status
The TPP status is displayed. Refer to
detailed information of TPP status.
•
Total Capacity
The total capacity of TPP is displayed.
•
ECO Mode Schedule
The ECO mode schedule that is assigned to the TPP is displayed.
If the ECO mode schedule is not assigned, the field is blank.
•
Action
When the ECO mode is enabled in TPP, "ON" is displayed. If the ECO mode is disabled,
"OFF" is displayed.
If the ECO mode is not assigned, a "-" (hyphen) is displayed.
•
Motor Status
The disk motor status for the TPP is displayed.
-
-
-
-
Online:
SAS disks
Nearline
Nearline SAS disks
SSD
High Performance (RAID1+0)
High Capacity (RAID5)
High Reliability (RAID6)
Mirroring (RAID1)
Striping (RAID0)
Active
The disk motors are activated.
In the Boot Process
The disk motors are starting up.
Idle
The disk motors are stopped.
In the Stop Process
The disk motors are being stopped.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
142).
142).
"B.4 Thin Provisioning Pool Status" (page 615)
140
"7.1.5 Thin
"7.1.5 Thin
for
P2X0-1090-02ENZ0