Table of Contents
Advertisement
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
5
8.2.12
Convert Copy Path
This function outputs the copy path information file for past ETERNUS Disk storage system
(hereinafter, referred to as "previous models").
The copy path information file that is created in ETERNUS DX90 S2 and ETERNUS DX410 S2/
DX440 S2 is converted to a file format that can be read by previous models and applied for
enabling the execution of Remote Equivalent Copy (REC) with previous models.
The applicable models are shown as follows:
•
ETERNUS DX90
•
ETERNUS DX410/DX440
•
ETERNUS DX8100/DX8400/DX8700
•
ETERNUS4000
•
ETERNUS8000
The procedure to convert copy path information file is as follows:
Procedure
1
2
Click the [Close] button to return to the [Copy Path] screen.
•
Conversion is performed only on the REC path information file created
by the procedure in
information file obtained by the procedure in
Path" (page
•
This function cannot be executed unless there is an ETERNUS DX Disk
storage system set as the conversion target in the copy path information
file.
Apply the converted copy path information file to each ETERNUS DX Disk
storage system by using the copy path setting function for each ETERNUS
DX Disk storage system that is set as a conversion target.
Click [Convert Copy Path] in [Action].
Select the copy path information file that is to be converted, and click the [Create
Data] button.
•
Copy Path Information File
This specifies the REC path information file for which the file format is converted.
Click the [Browse...] button to specify the REC path information file, or directly input the
path to the REC path information file.
•
Target Device Box ID
The Box ID of the ETERNUS DX Disk storage system set as file format conversion
target in the REC path information file that was read is displayed as an option.
Select the Box ID of the ETERNUS DX Disk storage system for which the file format is
converted.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
"8.2.8 Set Copy Path" (page 217)
239).
242
End of procedure
or the REC path
"8.2.10 Export All Copy
P2X0-1090-02ENZ0
Advertisement
Table of Contents
