Table of Contents
Advertisement
Chapter 4 Configuration Settings
4.1 Configuration Settings for Using Standard Volumes
Add Host
Add the information of any server that accesses the ETERNUS DX Disk storage system
via the ports. When adding a server, create a host group (a host (HBA) group that
accesses the same LUN group).
Refer to:
-
Add FC Host
-
Add iSCSI Host
-
Add SAS Host
The [Add FC Host] function can also be used to add FCoE
hosts.
Create Port Group
Create a port group (a group of ports that are connected to the specified host group) that
is used for the server to access the server.
Refer to:
-
Create FC Port Group
-
Create iSCSI Port Group
-
Create SAS Port Group
-
Create FCoE Port Group
Add LUN Group
Create a LUN group (a group of volumes that are recognized from the server, which is
conventionally referred to as an "Affinity group").
Correspond the volume number to the Logical Unit Number (LUN) that can be recognized
by the host for each LUN group.
LUN groups are recognized from the server by the host affinity setting that allocates the
port groups and the LUN groups to the host group.
Refer to:
-
Add LUN Group
55
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
P2X0-1090-02ENZ0
Advertisement
Table of Contents
