Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
•
Temperature restoration
Select whether to notify when a temperature error or warning status is recovered to the
normal status. When notifying, select the notification method.
•
User login/logout
Select whether to notify when a User login/logout is detected. When notifying, select
the notification method.
•
Operated RAID Group
Select whether to notify when the RAID group has been created or deleted. When noti-
fying, select the notification method.
•
Added/Released Hot Spare
Select whether to notify when the hot spare disk has been registered or released.
When notifying, select the notification method.
•
Operated Volume
Select whether to notify when the volume has been created or deleted. When notifying,
select the notification method.
•
Power off/on CFL
Select whether to notify when the ETERNUS DX Disk storage system is turned off/on
or when the controller firmware is changed in hot mode. When notifying, select the noti-
fication method.
•
SDP Usage Rate Over Lv1
Select whether to notify when an SDP Policy Level 1 (Informational) event occurs.
When notifying, select the notification method.
•
SDP Usage Rate Over Lv2
Select whether to notify when an SDP Policy Level 2 (Warning) event occurs. When
notifying, select the notification method.
•
SDP Usage Rate Over Lv3
Select whether to notify when an SDP Policy Level 3 (Error) event occurs. When notify-
ing, select the notification method.
•
Copy Table Size Usage Rate Over
Select whether to notify when the copy table usage exceeds the threshold. When noti-
fying, select the notification method.
•
Trial copy license expired
Select whether to notify when a copy trial license expiration event occurs. When notify-
ing, select the notification method.
•
Threshold of SDP usage can be specified using the procedure in
"8.2.7 Modify Copy Parameters" (page
•
Threshold of copy table size usage can be specified using the
procedure in
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
"8.2.6 Modify Copy Table Size" (page
554
215).
207).
P2X0-1090-02ENZ0
Advertisement
Table of Contents
