Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
2
3
9.2.3.6
Modify Port Group
This function performs the following modifications for existing port groups:
•
Port Group Name
•
Number of Port Group Members (Add and delete member ports in a port group)
Ports can be added to port groups for which the host affinity setting is already configured and
ports can also be deleted from port groups.
If a port has been added, the host affinity setting is automatically configured to the corresponding
port as a port group member.
If a port has been deleted, the host affinity setting is cleared from the corresponding port.
•
The maximum number of port groups per device is 128, irrespective of the CA types.
•
The maximum number of ports per port group is 8.
•
A port can be a member of several port groups.
The port group, of which host affinity settings have been configured
(the status of the port group is "Active"), cannot be deleted.
Click the [OK] button.
→ Deletion of the port group starts.
Click the [Done] button to return to the [Port Group] screen.
•
Registration of the port is necessary to create a port group. Not all of the
ports can be deleted from a port group.
•
Only ports with "CA" as the port mode can be added to a port group.
The ports, of which port mode is "RA", cannot be added to the port
group.
•
A port with the affinity mode enabled (On) and a port with the affinity
mode disabled (Off) cannot exist together in a port group.
-
The affinity mode (On/Off) of a port group is decided when the host
affinity setting has been configured on the corresponding port group.
All of the member ports in a port group have the same affinity mode.
-
The affinity mode (On/Off) of a port group is not changed until the
host affinity setting has been released from the corresponding port
group.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
350
End of procedure
P2X0-1090-02ENZ0
Advertisement
Table of Contents
