Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
3
4
9.2.3.5
Delete Port Group
This function deletes a port group. When a port group is deleted, the ports, which belong to the
port group, are also deleted.
The procedure to delete a port group is as follows:
Procedure
1
Click the [OK] button.
→ Registration of the FCoE port group starts.
An error screen appears in the following conditions:
•
When the port group name overlaps with an existing port group
name (port group names cannot overlap with any other port group
names, irrespective of the CA types.)
•
When the total number of ports has exceeded the maximum
number for the ETERNUS DX Disk storage system
•
When no ports are registered in a port group, or when nine or
more ports are registered in a port group
•
When the specified port does not exist in the ETERNUS DX Disk
storage system
•
When the port mode of the selected port is other than "FCoE"
•
When there are ports of which affinity mode is enabled (On) and
disabled (Off) existing together
Click the [Done] button to return to the [Port Group] screen.
Port groups that are being used for the Host Affinity settings cannot be
deleted.
Select the port group to be deleted (multiple selections can be made) and click
[Delete Port Group] in [Action].
→ A confirmation screen appears.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
349
End of procedure
P2X0-1090-02ENZ0
Advertisement
Table of Contents
