Fujitsu Eternus web GUI User Manual page 302

Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
3
■ Register a host by clicking the [Now Connected] tab
Register a host in a host group in the following procedures, and click the [Add]
button.
(1)
Select a host to be registered from the iSCSI host list, register the iSCSI host
information (the IP address and the Alias name, etc.) to the selected host, and click the
[Add] button.
- Checkbox to select an iSCSI host
Select the iSCSI host checkbox to be registered in a host group.
- IP Address
Specify the IP address of the iSCSI host.
When the IP address is not used for registering the host, entering an IP address is
not necessary.
Only when an iSCSI host has been selected, the IP address can be specified.
The following input conditions apply:
• 1 - 3 numeric characters can be entered in all the text boxes
• First text box: "1" - "255"
• Other text box: "0" - "255"
- Alias Name
Specify the Alias name of the iSCSI host.
If the iSCSI host has already been registered in the ETERNUS DX Disk storage
system, the Alias name is displayed.
When the Alias name is not used for registering the host, entering an Alias name is
not necessary.
Only when an iSCSI host has been selected, the Alias name can be specified.
The following input condition applies:
• 1 - 31 alphanumeric characters
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
302
P2X0-1090-02ENZ0