Table of Contents
Advertisement
Chapter 4 Configuration Settings
4.2 Configuration Settings for Using Thin Provisioning Functions
4.2
Configuration Settings for Using Thin Provisioning
Functions
The following section shows the series of settings that need to be performed to use Thin Provi-
sioning functions.
Not only can new Thin Provisioning Pool be created, adding or changing volumes that are regis-
tered in the existing Thin Provisioning Pools can also be performed.
Register Thin Provisioning License
Register the license to use the Thin Provisioning function.
Refer to:
-
Register Thin Provisioning License
Create Thin Provisioning Pool
Create a Thin Provisioning Pool (groups of drives (which are configured in RAID groups)
that configure a Thin Provisioning Pool).
Refer to:
-
Create Thin Provisioning Pool
Create Volume
Create a volume (physical drive area in the Thin Provisioning Pool). A volume is a struc-
tural unit of a Thin Provisioning Pool that can be recognized from the server. Select "Thin
Provisioning" for "Type".
Refer to:
-
Create Volume
Add Host
Refer to Step 3 onward in
54)
for the procedure to recognize the volume from the server.
57
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
"4.1 Configuration Settings for Using Standard Volumes" (page
P2X0-1090-02ENZ0
Advertisement
Table of Contents
