Table of Contents
Advertisement
Chapter 4
This chapter describes the following configuration settings:
•
Configuration settings for using Standard volumes
•
Configuration settings for using Thin Provisioning functions
4.1
Configuration Settings for Using Standard Volumes
The following section describes the series of settings when using Standard volumes.
Not only can new RAID groups be created, adding or changing volumes that are registered in
existing RAID groups can also be performed.
Configuration Settings
Create RAID Group
Create a RAID group (
DX Disk storage system
Refer to:
-
Create RAID Group
Create Volume
Create a volume (drive area in the RAID group). A volume is a structural unit of RAID that
can be recognized from the server. Select "Standard" for "Type".
Refer to:
-
Create Volume
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
a group of drives that configures the RAID in the ETERNUS
).
54
P2X0-1090-02ENZ0
Advertisement
Table of Contents
