Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
2
Modify the host response name or each item, and click the [Modify] button.
●
Setting parameters
•
Name
Specify the host response name.
An existing host response name cannot be specified.
The following input conditions apply:
-
1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Space
•
Byte-0 of Inquiry Response
Set the value for Byte 0 value of the Inquiry command from "No Conversion (Default)"
or "Custom".
For a certain period of time after the link between the ETERNUS DX Disk storage
system and the host has been established, the host sends an "Inquiry" command to
check the volume status in the device. Specify the Byte-0 of the Inquiry data to respond
this "Inquiry" command.
Byte 0 in the Inquiry data indicates the volume status.
-
No Conversion (Default)
Responds with the value specified in the ETERNUS DX Disk storage system.
-
Custom
When the Byte-0 is "0x20 (configuration is available, unformatted)", converts the
Byte-0 value to "0x7f (configuration is not available)" and responds.
•
Inquiry VPD ID Type
Set the Vital Product Data (VPD) information type to respond to the host.
VPD information includes the device information (Vender ID, Product ID for each
model, volume number, etc.) for the volume.
Type1 and Type3 indicate the data format.
-
Type1 + Type3 (Default)
-
Type1
-
Type3
•
Inquiry Standard Data Version
Specify the Standard Data Version (version number of the SCSI standard) of the
"Inquiry" command.
-
Version 5 (Default)
-
Version 4
-
Version 3
•
Command Timeout Interval
Select the setting method for the command timeout interval from the following items.
-
Default (25sec.)
-
Customize
When "Customize" is selected, input a value between 10 and 255 seconds
(numeric).
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
389
P2X0-1090-02ENZ0