Fujitsu Eternus web GUI User Manual page 513

Chapter 11 System Management
11.2 Functions in the Action Area for System
- Sender Mail Address *
Enter the sender E-Mail address of mails sent by the ETERNUS DX Disk storage
system for REMCS operations (required).
The following input condition applies:
• 1 - 63 alphanumeric characters and symbols
• SMTP Authentication Information
- Authentication Type
Select the SMTP authentication type.
• No SMTP Authentication
• POP Before SMTP Authentication
• AUTH SMTP Authentication
- Authentication Method
When "AUTH SMTP Authentication" is selected for "Authentication Type", specify
the SMTP authentication method.
• Automatic
• CRAM-MD5
• PLAIN
• LOGIN
- POP Server
When the "Authentication Type" is "POP Before SMTP Authentication", enter the
domain name or the IP address of the POP server that is used for SMTP Authenti-
cation.
The following input condition applies:
• 1 - 63 alphanumeric characters and symbols
- Port No.
Enter the port number that is used when communicating with the POP server.
The following input condition applies:
• Numeric characters ("0" - "65535")
- User Name
Enter the user name that is used when communicating with the POP server.
This setting is enabled when selecting "POP Before SMTP Authentication" or
"AUTH SMTP Authentication" for the "SMTP Authentication Type".
The following input condition applies:
• 1 - 32 alphanumeric characters and symbols
- Password
Enter the password that is used when communicating with the POP server.
This setting is enabled when selecting "POP Before SMTP Authentication" or
"AUTH SMTP Authentication" for the "SMTP Authentication Type".
The following input condition applies:
• 1 - 64 alphanumeric characters and symbols
• REMCS Center
- REMCS Center *
Select the REMCS center (in each country) where the ETERNUS DX Disk storage
system is connected (required).
"Direct Input Setting " is only available when logged on using a user account with
the "Maintenance Operation" role.
If logged in as the system administrator when "Direct Input Setting" has already
been specified, "Direct Input Setting" is displayed in the "REMCS Center" field and
cannot be changed to a different center.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
513
P2X0-1090-02ENZ0