Table of Contents
Advertisement
Chapter 8 Advanced Copy Management
8.1 Advanced Copy Status
-
-
•
Phase
The copy session phase is displayed. If the status is "Reserve", a "-" (hyphen) is displayed.
-
-
-
-
-
•
Error Code
The error code is displayed when an error occurs. If the status is "Reserve", a "-" (hyphen) is
displayed.
•
Time Stamp
The time when backup is complete and the time when an error occurred are displayed. If the
status is "Reserve", a "-" (hyphen) is displayed.
The time stamp is updated in the following conditions:
-
-
-
•
Elapsed Time
The elapsed time after a session starts is displayed. If the status is "Reserve", a "-" (hyphen)
is displayed.
•
Copied Data Size
The size of copy that has been complete is displayed. If the status is "Reserve", a "-" (hyphen)
is displayed.
•
Total Data Size
The total copy size is displayed. If the status is "Reserve", a "-" (hyphen) is displayed.
Suspend
Suspended by an instruction from the host
Error Suspend
Copy canceled due to an error
Copying
EC, Monitor, REC: Copying
For QuickOPC: Copying the updated areas after recording of updated areas is stopped
Equivalent
Maintaining equivalent status of the copy source and copy destination that are duplicated
after copy is complete
Tracking
Recording only the updated area after copy is complete
Tracking & Copy
Recording the area updated during copy processing and after copy starts
No Pair
No pair of duplicated copy source and copy destination is set
For OPC, QuickOPC, SnapOPC, and SnapOPC+
Copy start time is used as the backup completion time. The time stamp is updated when
copy starts and when an error occurs.
•
When the "Status" is "Active", the previous backup time is displayed.
•
When the "Status" is "Error", the time when an error occurred is displayed.
For QuickOPC, the time stamp is updated also at restart.
For EC
Suspend time is used as the backup completion time. The time stamp is updated at
Suspend and when an error occurs.
•
When the "Status" is "Suspend", the previous backup time is displayed.
•
When the "Status" is "Error", the time when an error occurred is displayed.
For Monitor
Time stamp is not displayed.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
174
P2X0-1090-02ENZ0
Advertisement
Table of Contents
