Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
11.2.6.4
Modify ECO Mode Schedule
This function modifies the ECO mode schedule.
Up to eight events can be specified for a single ECO mode schedule.
The procedure to edit an ECO Mode schedule is as follows:
Procedure
1
2
Disk operation time varies depending on the ECO mode schedule settings
and disk access.
A disk is spun up even if it is outside of disk operation time in the following
conditions:
•
If disk access occurs while the disk motor is stopped:
The disk is immediately spun up and can be accessed within 1 - 5
minutes.
•
If a disk is activated more than a set amount of times in a day:
A state of increased access frequency is assumed and the ECO mode
will cease stopping the disk motor.
•
To apply the modified ECO Mode schedule to RAID groups, refer to the
procedure in
•
To apply the modified ECO Mode schedule to each Thin Provisioning
Pool, refer to the procedure in
(page
166).
Select the ECO mode schedule that is to be edited and click [Modify Schedule]
in [Action].
Select the event that is to be modified and click the [Edit Event] button.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
"6.2.7 Assign ECO Mode Schedule" (page
"7.2.8 Assign ECO Mode Schedule"
546
131).
P2X0-1090-02ENZ0
Advertisement
Table of Contents
