Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
3
4
11.2.3.4
Setup SNMP Agent Manager
This function specifies the IP address of the SNMP Agent Manager.
The SNMP Agent Manager is used when accessing the ETERNUS DX Disk storage system
using the community name or the user name, or when sending a trap from the ETERNUS DX
Disk storage system to the SNMP Agent Manager.
Up to ten SNMP Agent Managers can be specified for each ETERNUS DX Disk storage system.
The procedure to set the SNMP Agent Manager is as follows:
Procedure
1
Click the [OK] button.
→ Setting of the SNMP Agent basic interface starts.
Click the [Done] button to return to the [Network] screen.
•
If the "SNMP Function" is disabled, this function cannot be used.
•
The IP address of the SNMP Agent Manager that is used in the settings
in
"11.2.3.7 Setup SNMP Agent Community" (page 474)
Setup SNMP Agent Trap" (page 477)
•
When SNMP Agent Manager exists in a different subnetwork from
where the ETERNUS DX Disk storage system belongs, specify the IP
address or the network address of SNMP Agent Manager in the
"Allowed IP List" using the procedure in
Environment" (page
Click [Setup SNMP Manager] in [Action].
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
458).
466
End of procedure
or
"11.2.3.8
cannot be changed or deleted.
"11.2.3.1 Setup Network
P2X0-1090-02ENZ0
Advertisement
Table of Contents
