Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
The procedure to set the date and time is as follows:
Procedure
1
2
•
When using ECO mode, make sure to set the time/date correctly.
•
If the date/time of the ETERNUS DX Disk storage system is wrong,
processes for stopping and starting the disk motor cannot be performed
in accordance with the ECO mode schedule.
•
When using the NTP server, the time modification method is the step
mode (modify immediately).
•
When using the NTP server, the ETERNUS DX Disk storage system is
synchronized with the NTP server every three hours.
Click [Modify Date and Time] in [Action].
Specify the parameters, and click the [Set] button.
●
Date/Time Information
•
Date
To change the current date and time settings, input the new values.
-
YYYY-MM-DD hh:mm:ss (YYYY: Year (2001 - 2037), MM: Month (01 - 12), DD: Day
(01 - 31), hh: Hour (00 - 23), mm: Minute (00 - 59), ss: Second (00 - 59))
●
Time Zone
•
Time Zone
Select the Time Zone from the list box. If the appropriate Time Zone does not exist,
select "Manually".
•
Time Zone (time difference setting)
When selecting "Manually" in the time zone field, specify the time difference from GMT
using [+]/[-] in hours and minutes.
-
Time difference
Select "+" or "-".
-
Hour
00 - 12
-
Minute
00, 15, 30, 45
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
578
P2X0-1090-02ENZ0
Advertisement
Table of Contents
