Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
3
4
•
To delete the settings, click the [Clear] button before clicking the
[Set] button.
•
When using the ETERNUS DX80 S2/DX90 S2, the MNT port
setting cannot be deleted.
•
When using the ETERNUS DX410 S2/DX440 S2, the FST port
setting cannot be deleted.
When two CMs are installed, a CM, to which authority to manage the
ETERNUS DX Disk storage system has been given, is called a
"Master CM". The other CM is called a "Slave CM". When an error
occurs in a CM or a LAN, the Master CM is automatically switched,
and the IP address of the old Master CM is passed to the new Master
CM. By specifying the IP address of the Slave CM, the Master CM
can be forcibly switched to the Slave CM when an error occurs and
the Master CM cannot be connected.
→ A confirmation screen appears.
Click the [OK] button.
→ Setting of the network environment starts.
Click the [Done] button to return to the [Network] screen.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
461
P2X0-1090-02ENZ0
Advertisement
Table of Contents
