Fujitsu Eternus web GUI User Manual page 447

Chapter 11 System Management
11.1 System Status
The following items are displayed in the Main area:
• Customer Information Setup
Whether or not the customer information has been specified at the REMCS center is dis-
played.
• Communication Environment Setup
Whether or not the communication environment information has been specified at the
REMCS center is displayed.
• Support Status
The Remote Support status is displayed.
-
-
-
-
If the support status is "Operating" or "Maintenance", one of the messages below appears in
parentheses based on the Remote Support operating status.
-
-
-
-
• Controller Firmware Version
The current controller firmware version is displayed.
-
• Automatic Firmware Upgrade
Whether the automatic firmware upgrade is enabled or disabled is displayed.
-
-
-
• Automatic Firmware upgrade (with activation on next power cycle)
Whether or not to execute the controller firmware application, after controller firmware down-
load has been completed, is displayed.
-
-
"-" (hyphen)
The Remote Support is not operating.
Operating
The Remote Support is operating.
Maintenance
The ETERNUS DX Disk storage system is under maintenance. When the operation to
complete maintenance is performed, the status returns to "Operating".
Stopping
The Remote Support has temporarily been stopped. Use the procedure in
Restart Remote Support" (page 521)
"Operating" state.
Downloading Controller Firmware
Canceling Download of Controller Firmware
Installing Controller Firmware
Exporting Log
VxxLyy-zzzz (Vxx: Version, Lyy: Level, zzzz: Release number)
"-" (hyphen)
The Remote Support is not operating.
ON (download schedule)
The automatic firmware upgrade is enabled. Receive controller firmware according to the
download schedule.
OFF
The automatic firmware upgrade is disabled.
"-" (hyphen)
The Remote Support is not operating.
ON
Execute the controller firmware application after controller firmware download is complete.
The downloaded controller firmware will be changed to the controller firmware which will
be enabled at the next startup.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
to restart the Remote Support and return to the
447
"11.2.4.6 Stop/
P2X0-1090-02ENZ0