Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
3
4
9.2.3.9
Configure SAS Port
This function sets the connection information for the SAS port that is used to connect the
ETERNUS DX Disk storage system and the host.
The procedure to set SAS port parameters is as follows:
Procedure
1
2
Click the [OK] button.
→ Modification of the iSCSI port parameters starts.
Click the [Done] button to return to the [Ports] screen.
When changing port parameters during operation, stop access from the
server that is allocated to the target port. Host access does not need to be
stopped to change the port parameters of newly added CA ports.
For more details on SAS parameter settings, refer to "User's Guide -Server
Connection-" for each OS type.
Select the SAS port to set the parameters for (multiple selections can be made)
and click [Configure SAS Port] in [Action].
When multiple ports are selected, select the target port and set the
parameters for each port.
Set the parameters for all of the selected ports and click the [Set] button.
•
Port
Select the target port or select the copy source port.
The location options for the selected port are displayed:
-
CM#x CA#y Port#z (x: CM number, y: CA number, z: Port number)
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
369
End of procedure
P2X0-1090-02ENZ0
Advertisement
Table of Contents
