Fujitsu Eternus web GUI User Manual page 320

Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
3
■ Add or delete a host by clicking the [Registered And Now Connected] tab
Add or delete a host in a host group in the following procedures.
(1)
Add or delete iSCSI hosts, register the iSCSI host information (the IP address and the
Alias name, etc.) to the added host, and click the [Modify] button.
- Checkbox to select hosts
Select the corresponding host checkbox in the iSCSI host list, to add a host.
Clear the corresponding host checkbox in the iSCSI host list, to delete a host.
If the iSNS server has not been configured in the
Configure iSCSI Port" (page 357)
be automatically acquired.
- IP Address
IP address of the member host is displayed.
To add an iSCSI host to a host group, select the checkbox of the iSCSI host to be
added, and enter the IP address.
When the IP address is not used for registering the host, entering an IP address is
not necessary.
The following input conditions apply:
• 1 - 3 numeric characters can be entered in all the text boxes
• First text box: "1" - "255"
• Other text box: "0" - "255"
- Alias Name
The Alias name of the member host is displayed.
To add an iSCSI host to a host group, select the checkbox of the iSCSI host to be
added, and enter the Alias name.
If the iSCSI host has already been registered in the ETERNUS DX Disk storage
system, the Alias name is displayed.
When the Alias name is not used for registering the host, entering an Alias name is
not necessary.
The following input condition applies:
• 1 - 31 alphanumeric characters
- CHAP User ID
The user ID of the member host, for which CHAP Authentication will be used, is
displayed.
To use the CHAP Authentication on the iSCSI host to be added, select the checkbox
of the iSCSI host, and enter the user ID. It is not necessary to configure this item if
CHAP Authentication is not used.
If the iSCSI host has already been registered in the ETERNUS DX Disk storage
system, the user ID is displayed.
Configure a user ID and a password as a pair.
The following input condition applies:
• 1 - 255 alphanumeric characters
- Change CHAP Password
To register or change the CHAP Authentication password, select the checkbox.
Only when an iSCSI host has been selected, the checkbox can be selected.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
320
"9.2.3.8
function, the iSCSI host cannot
P2X0-1090-02ENZ0