Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
The procedure to change the port mode is as follows:
Procedure
1
2
3
If the port mode has been changed, the port parameter returns to the
default setting.
Select ports, of which port mode is to be changed (multiple selections can be
made). Click [Modify Port Mode] in [Action].
Only when ports with the same port mode are selected, [Modify Port
Mode] can be clicked.
Select the port mode to be changed over to, and click the [Set] button.
•
Port Mode
Select from "CA" or "RA" for the changed port mode.
The currently set port mode will not be displayed as an option.
If the currently set port mode is "CA", "RA" is the default option.
-
CA
-
RA
→ A confirmation screen appears.
Click the [OK] button.
→ Port mode changeover starts.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
374
P2X0-1090-02ENZ0
Advertisement
Table of Contents
