Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
■ When only "FC 1-Port", "FC 2-Port" or "FC 4-Port" is selected in the "Port Type" field
■ When "iSCSI-RA" is selected in the "Port Type" field
■ When "iSCSI 1-Port" or "iSCSI 2-Port" is selected in the "Port Type" field and one or more
6
The displayed screen is different depending on the port settings.
•
When a device for which port setting is not completed exists
→ The [Device Configuration Setting] screen appears again. Proceed to
•
When port setting is completed for all the selected devices
→ The [Device Information File Selection] screen appears. Proceed to
→ The [iSCSI Port Information Setting] screen appears. Proceed to
ports used as "RA" exist
→ The [iSCSI Port Information Setting] screen appears. Proceed to
Set the iSCSI port in the [iSCSI Port Information Setting] screen, and click the
[Next] button.
•
IP Address
Specify the IP address of the iSCSI port. If not specified, the field is blank.
The following input conditions apply:
-
Numeric characters
-
First text box: "1" - "255"
-
Other text box: "0" - "255"
•
iSCSI Name
Specify the iSCSI name of the iSCSI port. If not specified, the field is blank. Specify a
unique iSCSI name in the same device.
Both "IP Address" and "iSCSI Name" cannot be omitted.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
224
Step
5.
Step
7.
Step
6.
Step
6.
P2X0-1090-02ENZ0