Huawei SmartLogger1000 User Manual page 123

SmartLogger1000
User Manual
Context
In addition to the method provided in this section, you can also press and hold
the home screen to adjust the contrast.
Procedure

LCD
Issue 12 (2019-01-15)
To set the SmartLogger contrast, perform the steps in the following table: The parameter
values in the figures are for reference only.
Copyright © Huawei Technologies Co., Ltd.
Procedure
1. On the default screen, press
the main menu.
2. Choose and press
3. Specify the User Name and Password by
pressing or , and then press
NOTE

Because of the limited permission, select the
User Name as Common User or Advanced
User. The initial password for Common User
and Advanced User is 000001.
 After passing the permission validation, the
system keeps the authentication information for
30 seconds. If you exit from the Settings page
and log in again within 30 seconds, no
authentication is required.
6 User Interface
or on
to enter
.
.
110