Data Recollection - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
Figure 7-80 Clearing alarms





7.11.8.5 Data Recollection

Users can recollect previous performance data and energy yield over the WebUI. The
recollection results can be queried on the Monitoring page.
Because of permission restriction, log in as Advanced User or Special User. Choose
Maintenance > Data Re-collection to access the page.
1.
2.
Issue 12 (2019-01-15)
By clearing alarms, users can clear all active and historical alarms for the selected device
and enable the SmartLogger to re-collect alarm data.
By clearing alarms, users can clear the local SmartLogger alarms or device storage alarms.
If the version of the SUN2000-(8KTL-28KTL) is earlier than SUN2000 V100R001C81,
users can only clear local SmartLogger alarms by performing the operation.
If Clear Alarm is performed for the Huawei devices such as the inverter and PID, Alarm
Reset must be performed on the NMS. Otherwise the SmartLogger cannot collect alarm
data from the devices after alarms are cleared.
If Clear Alarm is performed for the SmartLogger, Alarm Reset must be performed on the
NMS. Otherwise the SmartLogger cannot collect alarm data from the devices after Alarm
Reset is performed.
 This function is not supported by the SUN2000-(8KTL-28KTL).
 When you perform data recollection and query the performance data of the inverter after the
SUN2000-33KTL/40KTL software is upgrades from SUN2000 V200R001C00SPCXXX to
SUN2000 V200R001C90SPCXXX, the current-day energy yield generated before the upgrade
cannot be queried.
Select the data recollection type and the corresponding recollection period.
Select the inverter whose data needs to be recollected.
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
252