Huawei SmartLogger1000 User Manual page 129

SmartLogger1000
User Manual
Change the password in compliance with the following principles:


Procedure

LCD
Issue 12 (2019-01-15)
Six characters are required.
The password consists of digits, uppercase letters, and lowercase letters.
The following table describes the procedure for changing a password. The parameter
values in the following figures are for reference only.
Copyright © Huawei Technologies Co., Ltd.
Procedure
1. On the default screen, press
the main menu.
2. Choose and press
3. Set User Name and Password by pressing
or , and press
NOTE

User Name can be set to any of the following
values: Common User, Advanced User, and
Special User. The initial password is 000001.
 After the authentication is successful, the
system keeps the authentication information for
30 seconds. If you exit from the Settings screen
and log in again within 30 seconds, no
authentication is required.
6 User Interface
to enter
.
.
116