Setting The Co Emission Reduction Coefficient - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
6.2.24 Setting the CO
Procedure

LCD Display
Issue 12 (2019-01-15)
Emission Reduction Coefficient
2
The following table describes the procedure for setting the CO
coefficient. The data on the following figures are for reference only.
Copyright © Huawei Technologies Co., Ltd.
2
Procedure
1. On the default screen, press
the main menu.
2. Choose and press
3. Specify the User Name and Password by
pressing or , and then press
NOTE
 Because of the limited permission, select the
User Name as Common User or Advanced
User. The initial password for Common User
and Advanced User is 000001.
 After passing the permission validation, the
system keeps the authentication information for
30 seconds. If you exit from the Settings page
and log in again within 30 seconds, no
authentication is required.
6 User Interface
emission reduction
to enter
.
.
114