Emi; Querying Related Information; Setting Emi Parameters - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual

7.8.4 EMI

7.8.4.1 Querying Related Information

Choose Monitoring > EMI and query related information on the displayed page.
Figure 7-24 Querying EMI-related information

7.8.4.2 Setting EMI Parameters

Devices from different vendors may support different protocol specifications. To normally
obtain information from the connected EMI, correctly configure the protocol specifications
over the SmartLogger WebUI based on the protocol specifications delivered by the vendor.
After the SmartLogger connects to the EMI, manually add the device. For details, see
Connecting
Because of permission restriction, log in as Advanced User. Choose Monitoring > EMI and
set EMI parameters.
Issue 12 (2019-01-15)
 NO.: number of the SNs used only to show the quantity of devices
 Device: device name of each inverter. The naming rule is Model(PLC-x) by default. For example:
40KTL(PLC-3).
 You can click the
the tertiary navigation menu to query EMI-related information.
 EMI performance data can be stored for a month and exported. When changing the name of the
exported file, retain the extension .tar.gz. Otherwise, the file will be unavailable.
Devices. Device Type should be set to EMI.
Copyright © Huawei Technologies Co., Ltd.
,
7 WebUI
, or tab on
7.11.8.1
202