Huawei SmartLogger1000 User Manual page 144

SmartLogger1000
User Manual
LCD
Here use the pages displayed when you
log in to the SmartLogger as Advanced
User.
Issue 12 (2019-01-15) Copyright © Huawei Technologies Co., Ltd.
Procedure
3. Enter the User Name and Password by
pressing or , and then press
NOTE

Because of the limited permission, select the
User Name as Advanced User or Special
User. The initial password for Advanced User
and Special User is 000001.
 After passing the permission validation, the
system keeps the authentication information for
30 seconds. If you exit the screen and log in
again within the 30 seconds, no permission
authentication is required.
4. Choose USB Expansion and press
NOTE
 Before this operation, connect the USB flash
drive to the USB port.
 The system takes 5 to 10 seconds to detect the
USB flash drive. Then perform the following
steps.
5. Choose Batch Upgrade and press
6. Choose SUN2000 and press
6 User Interface
.
.
.
.
131