Safety Precautions; Precautions - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
Read the safety precautions carefully. Otherwise, human injury and equipment damage may
occur.

1.1 Precautions

This topic describes the precautions for installing and operating the SmartLogger.
Personnel Requirements


Read this document thoroughly before operations. Huawei shall not be liable for any
consequence caused by violation of the storage, transportation, installation, and operation
regulations specified in this document.
Identification Protection


Installation




Issue 12 (2019-01-15)
Only qualified and trained electrical technicians are allowed to install and operate the
SmartLogger.
Operation personnel should understand the composition and working principles of the
PV grid-tied power generating system and local regulations.
The signs on the SmartLogger shell specify important information about secure
operations. Do not damage the signs.
The nameplate attached to the bottom of the SmartLogger lists the SmartLogger
parameters. Do not damage the nameplate.
Before installing the SmartLogger, ensure that it is not connected or energized.
Install the SmartLogger in well-ventilated environments to ensure system performance.
Ensure that the heat dissipation holes of the SmartLogger are not blocked.
Do not move the components inside the shelf except for the wiring terminals at the
bottom.
Copyright © Huawei Technologies Co., Ltd.
1

Safety Precautions

1 Safety Precautions
1