Huawei SmartLogger1000 User Manual page 175

SmartLogger1000
User Manual
Icon
Issue 12 (2019-01-15)
Description
Click the
Increase/Decrease icon to
adjust time.
The Select icon indicates
that a parameter is
selected.
The Select icon indicates
that a parameter is not
selected. Click the icon to
select a parameter.
Hide icon and Display
icon. Click them to hide
and expand parameters.
The device is in
Disconnection state.
If a device is in
Disconnection state, its
parameters cannot be set.
 The inverter is in
Initializing,
Power-off, Idle, or
other state in which it
is not feeding power
into the grid.
 The PID device is in
Power-off, Idle or
other state in which it
is not running
properly.
Copyright © Huawei Technologies Co., Ltd.
Icon
-
7 WebUI
Description
Click the Start icon to
start the device.
Click the Stop icon to
shut down the device.
Click the Reset icon to
reset the device.
 The inverter is in
On-grid state.
 The EMI, power
meter, slave
SmartLogger, or PLC
is in Online state.

The PID is in
Running state.
The inverter is in
Loading state.
-
162