SmartLogger1000
User Manual
7.11.8.2 Device List
Because of permission restriction, log in as Advanced User or Special User. Choose
Maintenance > Device list to access the target page.
Figure 7-78 Device list
7.11.8.3 Exporting Parameters
Because of permission restriction, log in as Advanced User or Special User. Choose
Maintenance > Export Param. to access the target page.
Issue 12 (2019-01-15)
Auto Assign Address allows you to adjust device addresses based on serial numbers. If a device
cannot access due to address conflict, perform this operation to assign a new device address and then
access the device.
After a device is connected, you can export the configurations for the device. If you need to change
the name of the exported file, retain the extension .cfg. Otherwise, the file will be unavailable.
You can click the Start, Stop, or Reset icon to send the corresponding command to all SUN2000s
connected to the SmartLogger. The login password is required if you need to send a command.
You can modify the device name and address on the WebUI, or export a device information file in CSV
format and import the CSV file into the WebUI after modification.
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
250