Appearance - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual



2.2 Appearance

This topic describes the SmartLogger in terms of its appearance and specifications.
Front View of the Shell
Figure 2-2 Front view of the SmartLogger
Issue 12 (2019-01-15)
Supports power grid dispatching: active power reduction and reactive power
compensation.
Intelligent management
− Automatically scans and identifies Huawei inverters and supports protocol
conversion for third-party devices
− Supports access from third-party devices that use the standard Modbus-RTU
protocol.
− Automatically assigns RS485 addresses to the connected inverters and allows for
adjusting RS485 addresses based on device sequence numbers to facilitate remote
configuration and maintenance.
− Supports remote setting of inverter parameters and synchronizes the parameters of
one inverter to other inverters in batches.
Remote maintenance
− Supports connection to both Huawei NMS and a third-party NMS using
Modbus-TCP and IEC104 protocol to remotely manage all devices.
− Allows users to access a third-party NMS over the File Transfer Protocol (FTP).
− Sends energy yield and fault information to users by emails.
The LCD on the SmartLogger monitoring panel displays information about the power site, devices,
alarms, and products. This topic describes how to set parameters and maintain devices over the
monitoring panel.
Copyright © Huawei Technologies Co., Ltd.
2 Overview
5