Reactive Power Adjustment - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
Figure 8-7 Synchronizing the clock source
1.
2.
3.
Set Active power control mode to Remote output control.
Figure 8-8 Remote Output Control

8.3 Reactive Power Adjustment

Before setting Reactive power control mode, set Reactive power control to Enable.
Issue 12 (2019-01-15)
Clock source: Set NTP.
Server: Set the server IP address or domain name.
NTP synchronization test: Check the time synchronization status.
 Control area: Set the areas for remote output control. To enable the function in some areas, the
license needs to be imported and enabled.
 Output control duration: Set the time required for the inverter to change its output power from 0%
to 100% or from 100% to 0%.
 PV plant ID: Set the ID assigned by the power company to the SmartLogger.
 Remote output control server: Set the server IP address or domain name.
 If the connection between the SmartLogger and the server is abnormal, obtain the output control file
in .data format from the website of the power company and import the file.
 After the SmartLogger connects to the server, you can export the relevant file.
Copyright © Huawei Technologies Co., Ltd.
8 Power Grid Scheduling
261