Logging In To The Webui - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
Step 5 Set Security level for this zone to Medium or Low.
----End

7.3 Logging In to the WebUI

Context
The SmartLogger has been connected to a PC directly or over the Ethernet. For details, see
4.8 Connecting an Ethernet Network
If you log in to the WebUI for the first time, a security risk warning shown in
displayed. Click Continue to this website. to continue the WebUI login.
Figure 7-5 Security risk warning
Procedure
Step 1 Enter https://XX.XX.XX.XX in the address box of the browser, and press Enter. The login
page is displayed.
Issue 12 (2019-01-15)

It is recommended that users use their own certificates. If the certificate is not replaced, the security
risk warning will be displayed during each login.

After logging in to the WebUI, you can import a certificate under Network Security Certification
on the 7.11.3 Setting Security Parameters
 The imported security certificate needs to be bound to the SmartLogger IP address. Otherwise, the
security risk warning will still be displayed during login.
Copyright © Huawei Technologies Co., Ltd.
Cable.
page.
7 WebUI
Figure 7-5 is
155