Settings - ABB RELION REX640 Technical Manual

1MRS759142 C
9.5.8
Table 1348: SECRSYN Group settings (Basic)
Parameter Values (Range)
Live dead mode
Difference voltage
Difference frequency
Difference angle
Table 1349: SECRSYN Non group settings (Basic)
Parameter Values (Range)
Operation
Synchro check mode
Dead line value
Live line value
Dead bus value
Live bus value
Max energizing V
Table 1350: SECRSYN Non group settings (Advanced)
Parameter Values (Range)
Control mode
Close pulse
Phase shift
Minimum Syn time
Maximum Syn time
Energizing time
Closing time of CB
Voltage source switch
REX640
Technical Manual

Settings

Unit
-1=Off
1=Both Dead
2=Live L, Dead B
3=Dead L, Live B
4=Dead Bus, L Any
5=Dead L, Bus Any
6=One Live, Dead
7=Not Both Live
0.01...0.50 xUn
0.0002...0.1000 xFn
5...90 deg
Unit
1=on
5=off
1=Off
2=Synchronous
3=Asynchronous
0.1...0.8 xUn
0.2...1.0 xUn
0.1...0.8 xUn
0.2...1.0 xUn
0.50...1.15 xUn
Unit
1=Continuous
2=Command
200...60000 ms
-180...180 deg
0...60000 ms
100...6000000 ms
100...60000 ms
40...250 ms
0=False
1=True
Step Default
1=Both Dead
0.01 0.05
0.0001 0.0010
1 5
Step Default
1=on
3=Asynchronous
0.1 0.2
0.1 0.8
0.1 0.2
0.1 0.5
0.01 1.05
Step Default
1=Continuous
10 200
1 0
10 0
10 2000
10 100
10 60
0=False
Section 9
Control functions
Description
Energizing check mode
Maximum voltage difference limit
Maximum frequency difference limit
Maximum angle difference limit
Description
Operation Off / On
Synchro check operation mode
Voltage low limit line for energizing check
Voltage high limit line for energizing check
Voltage low limit bus for energizing check
Voltage high limit bus for energizing check
Maximum voltage for energizing
Description
Selection of synchro check command or
Continuous control mode
Breaker closing pulse duration
Correction of phase difference between
measured U_BUS and U_LINE
Minimum time to accept synchronizing
Maximum time to accept synchronizing
Time delay for energizing check
Closing time of the breaker
Voltage source switch
1397