Siemens SINAMICS S120 Commissioning Manual page 131

8. Select the Power Module based on the Article No.
The data of the selected Power Module is assigned to the Power Module in the device
configuration. The Power Module has therefore been specified.
The corresponding component is shown in the device configuration in dark gray.
9. To select the adapter in the device view, click on the white area of the "CUA" component.
10.Select the "Control Unit Adapter - Selection - CUA" entry in the secondary navigation of the
inspector window.
The available adapters are displayed in the selection list.
11.Select the required adapter type.
The data of the selected adapter type is assigned to the adapter in the device configuration.
The adapter has therefore been specified.
The corresponding component is shown in the device configuration in dark gray.
The PM240-2 has been inserted and specified together with the CUA in the device configuration.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Commissioning
5.3 Creating a project offline
129